THE CMI METHOD
The Current Magnetometry Inspection (CMI), as a non destructive technology (NDT), enables you to receive wanted information about your pipeline effortlessly. No pipeline preparations are needed to ensure a safe flight of our inspection drone. This means cleaning and opening the pipeline are not necessary.
Consequently, the production mode of the pipeline is not affected by the inspection at any point. Save time and money by combining all our services in one inspection run. You choose the services that you need.
HOW DOES AN INSPECTION WORK?
Click on the video below to receive further insights of the inspection procedure.
OUR INSPECTION DRONE IS EQUIPPED WITH:
- AI ALGORITHMS
- LIDAR
- RADAR
- MAGNETIC FIELD SENSORS
- 4K CAMERA
- LEAK DETECTION SENSOR
- RTK GPS
- ALARM SYSTEM
This makes it the most powerful tool for pipeline inspection in the UAV market.
- Max. inspection height: 5 m
- Payload: 25 kg
- Daily productivity: 10 km
- Max. pipe depth: 6 m
- Avg. inspection height: 1 m
- Max inspection speed: 3 km/h
WALL THICKNESS | DIAMETER | MEDIUM | GRADE OF STEEL | PRESSURE | COATING | OUT OF SERVICE
No limitations
INSPECTION DISTANCE
Not limited | dependent on project | ca. 10 km per day and drone
Max. Measurement uncertainty pipeline depth
2 %
MAX. Measurement uncertainty XYZ
20 mm
WHICH TYPES OF PIPELINES
CAN BE INSPECTED?
Generally, all kinds of buried pipelines can be inspected. Specific limitations, like waterways, are service based and shall be discussed with one of our inspection specialists individually.